Ductless Mini Split Systems
 Mini split Air Conditioners & Heat Pumps have two main components: an indoor air-handling unit containing evaporator with blower and an outdoor unit containing compressor with condenser coil. A conduit with the power cable, refrigerant tubing and condensate drain links the indoor and outdoor units.
The Indoor Unit has been uniquely designed to provide Whisper Quiet operation while delivering comfort throughout the room(s). A typical indoor unit is only 32 inches by 11 inches by 7 inches deep and weighs 18 pounds.
The main advantages of mini splits are their small size and flexibility for zoning or heating and cooling individual rooms. Many models can have as many as four indoor air handling units (for four zones or rooms) connected to one outdoor unit.
Since each of the zones will have its own thermostat, you only need to condition that place when someone is there. This will save energy and money.
The Inverter Controlled Compressor operates by changing the frequency from 60Hz to a varying range (20Hz to 125 Hz). The inverter will control the compressor to modulate on a high frequency and rapidly reach desired temperature. When the desired temperature has been achieved, the inverter will control the compressor to run on a lower frequency to maintain precise temperature and consume less energy. Inverter Controlled Compressor maintains precise control of room temperature and creates a more comfortable environment. In conventional ON/OFF compressors, the compressor turns OFF once the set temperature is reached, and turns back ON after the temperature rises. The time it takes for the unit to switch on and off causes the room temperature to greatly fluctuate. With the inverter Controlled Compressor, the power reduces once the desired temperature has been reached, but continues operating at a reduced state to maintain a stable room temperature with minimal fluctuation. With low-frequency operation, the system reduces energy waste and provides the best efficiency
Wireless Remote Control
Infrared Remote Control with an easy to read LCD Display, gives the user the capability to adjust and set: temperature, sweep (louver control), fan speeds, timer, night setback and more, for complete automatic operation.
3 Fan Speeds and Automatic Fan Operation
Convenient microprocessor control automatically adjusts fan speed to High, Medium or Low. According to room temperature to maintain a comfortable airflow throughout the room.
Air Sweep Control
The air sweep function moves the louver up and down in the air outlet, directing air in a "sweeping" motion around the room and providing comfort in every corner.
Automatic Heating and Cooling Changeover
After setting the temperature and functions you desire, just relax. If the room temperature is higher than the set temperature, heating operation begins. During normal thermostat cycle operation, cooling and heating operations automatically change in accordance with set temperature, time and room temperature.
|
